The XE series of Xorcom’s Asterisk-based IP-PBX appliances features a multi-function Liquid Crystal Display, or “LCD”, touch panel. This feature allows the system administrator to perform several of the most common administrative functions directly on the front panel of the PBX.
Below are the first three videos in the series:
How to Discover / Configure IP Address for Xorcom XE Series
How to Map IP-PBX FXS Extension Numbers to Physical Ports
How to Restore the IP-PBX to Factory Default Settings
The XE2000 is an Intel Atom based Asterisk® IP PBX with PSTN / telephone ports. The stand-alone XE2000 features the Elastix™ Asterisk distribution and may be equipped with up to 32 analog FXS/FXO ports, up to 8 BRI ports, and/or a single E1/T1 PRI, T1 CAS or E1 R2 port in a single, 19″ 2U chassis. Additional PSTN / Analog phone ports can be provided by connecting external Astribank units via the USB2 ports, for a total of up to 160 PSTN / Analog phones ports, up to 200 users and up to 45 concurrent calls.
Hardware
- Processor: Intel Atom D525 Dual Core 1.8 GHz
- RAM: 1 GB
- Hard disk: From 250GB 2.5″ (optional upgrade to 500GB)
- RAID1: Dual hard drive for increased system reliability
- Fan: 3 redundant fans
- Echo Cancellation module: Voice enhancement & echo cancellation (optional)
- USB: 2 external USB 2.0
- I/O Ports (model-specific): Input/Output ports for Asterisk peripheral device support
- Rapid PA™ (optional and model-specific): Public Address capability for FXS port(s)
The XE3000 is a heavy-duty, stand-alone, pre-configured, out-of-the-box Asterisk IP PBX featuring the Elastix™ Asterisk distribution. The XE3000 may be equipped with up to 32 analog ports, up to eight BRI ISDN ports, and up to 4 E1/T1 PRI, T1 CAS or E1 R2 ports in a single, 19″ 2U chassis. Additional PSTN/analog phone ports can be provided by connecting up to 24 external Astribank units via the USB2 ports, for a total of up to 800 PSTN/analog phones ports, up to 1000 users and up to 480 concurrent calls.
Hardware
- Processor: Intel Quad-Core Q9550 2.83GHz
- RAM: 4 GB
- Hard disk: From 250GB 2.5″ (optional upgrade to 500GB)
- RAID1: Dual hard drive for increased system reliability
- Fan: 3 redundant fans
- Echo Cancellation module: Voice enhancement & echo cancellation (optional)
- USB: 4 external USB 2.0
- I/O Ports (model-specific): Input/Output ports for Asterisk peripheral device support
- Rapid PA™ (optional and model-specific): Public Address capability for FXS port(s)
