New Firmware released for Yeastar S-Series PBX

Yeastar has announced the release of the new firmware version 30.11.0.28 for the award-winning S-Series IP PBX.

See version 30.11.0.28 below (released 22nd October 2019) or view via the Yeastar Document Centre. You can also see latest updates to the S-Series IP PBX, VoIP Gateways and other Yeastar products, via Yeastar Firmware Downloads.

Version 30.11.0.28

Released Date: October 22, 2019

OPTIMISATION

System Stability

Fixed the system issue: The system memory would be insufficient if an unstable network drive kept disconnecting and reconnecting to the PBX.

Extension

Optimized Max Call Duration(s) setting.
- Max Call Duration(s) setting is applicable to all types of calls on the PBX.
- Max Call Duration(s) setting for Extensions: Added 10800 option (PBX > Extensions > Features > Max Call Duration(s)).
- Global Max Call Duration(s) setting: Added 10800 option (PBX > General > Preferences(s)).
Note: The precedence of Max Call Duration(s) (Global v.s. Extension):
- For internal calls: The Max Call Duration(s) setting of the caller’s extension takes precedence.
- For outbound calls: The Max Call Duration(s) setting of the caller’s extension takes precedence.
- For inbound calls: The global Max Call Duration(s) setting takes precedence.
Optimized extension registration: The PBX would not send MWI NOTIFY message to Linkus client after the Linkus client was registered.
Optimized extension registration: Speed up and shorten the time of registering extensions in bulk.

Trunk

Fixed the issue of SIP trunk setting: The setting of Maximum Channels on SIP trunk could not take effect.

SIP Settings

Added support for responding 200OK when receiving 407 Proxy Authentication Required.
Optimized the All Busy Mode for SIP Forking feature.
Fixed the issue of Inband Progress: The Inband Progress option was not checked, the inband_progress = no parameter was added to configuration file automatically, then the users’ custom configuration could not take effect.
Fixed the issue of SIP INFO compatibility: PBX did not respond when receiving SIP INFO packets (content-type=application/QSIG), and the call was ended after 32 seconds.

Network

Optimized the feature of IP Auto Defense: The maximum value of Number of IP Packets is 255.

Note: In the earlier version, the maximum value of Number of IP Packets was 120.
Fixed the static routes issue: The static routes for PPPoE could not take effect after PPPoE was reconnected.

Call Features

Fixed the Call Forwarding issue: Call Forwarding destination was set to Ring Group, but calls could not be forwarded to the Ring Group correctly.
Fixed the Ring Group issue: The internal call to a Ring Group has been answered by a Ring Group member, but a prompt of missed call still displayed on other members’ phone.
Fixed the issue of Speed Dial list: After adjusting the order of speed dial list by Speed Dial Code or Phone Number, the speed dial list was disappeared.
Fixed the issue of call pickup: The caller ID was not displayed on the phone when the inbound call was picked up.

CDR and Call Recording

Optimized the search method of CDR and recordings: Speed up and shorten the time of searching CDR and recordings.
Fixed the CDR issue: When the Queue members enabled DND, the missed calls did not display in the CDR.
Fixed the CDR issue: If a call to a Queue was unanswered after transferring blindly, multiple records of missed calls were generated in CDR.

Fax Detection

Fixed the issue of Fax Detection: If a trunk was used both for call and fax, and Fax Detection was enabled on Inbound Routes, fax might fail to be sent from PBX.

Multisite Interconnect

Fixed the compatibility issue between Multisite Interconnect and Queue: The asterisk might crash when the caller who called to a queue hung up.
Fixed the issue of Multisite Interconnect: When using Multisite Interconnect feature, the PIN List of Outbound Routes could not take effect on the Headquarter.

Event Notification

Optimized the event notification feature: when network disconnects, the PBX can notify the contact through extension or mobile phone.
Fixed the notification issue of System New Firmware Detection: After enabling the System New Firmware Detection, the notification contact would receive a large number of event emails after the PBX updated firmware.

Storage

Fixed the issue of USB formatting: After formatting the USB driver, the USB status displayed on Storage Devices list was wrong.

Event Log

Fixed the Event Log issue: If the Interface Type of Digital trunk was set to T1 or J1, the SS7/PRI Debug could not be set correctly.

API

Fixed the issue of wake-up service: Set the alarm type to onetime, even if the wake-up call had been answered, the alarm still repeated at the next cycle.
Fixed the issue that the API worked anomaly, and the web interface was inaccessible.

Firewall

Optimized Firewall feature: when the blocked IP address is added to Firewall Rules, this IP address will be removed from the Blocked IP Address list.
Fixed the Firewall issue: The PBX would add the dropped IP address to Blocked IP Address list even if Drop All was enabled.

Email

Added STARTTLS option to Email.

Note: If you enable TLS, the STARTTLS is enabled by default . If the mail server doesn’t support STARTTLS, please disable this option.
Optimized the Email settings: All characters are allowed in the Password field.
Fixed the issue of system Email: The PBX could not delete the received emails that contained long contents or special characters, which caused the PBX web interface to be inaccessible.

Remote Management

Fixed the issue of Remote Management: The prompt time displayed wrongly after time-out of remote connection.
Fixed the issue that remote management connection might be failed.

Auto Provisioning

The new version of Auto Provisioning (1.8.13) is pre-installed after upgrading the PBX. Check the updates below.

Added support for the following IP phones:
- Fanvil: X210, X210i, X1, X1S, X1SG, X2C, X3SG, X3U, X4U, X5U, X6U, X7, X7A and X7C
- Snom: D385, D735 and D717
- Yealink: VP59 and W60B
- Polycom: VVX411
Optimized DSS settings of Fanvil phones (X5/X5G,X4/X4G,X5S and X6): Added Action URL type of DSS key.
Optimized Custom Template of Snom phones:You can add custom parameters in the custom template.
Fixed the issue of Snom phones: The phones did not reboot automatically after performing auto provision.
Optimized settings on Snom phones (D305, D315, D345 and D375): Added the Tone Scheme setting in Preference tab.
Optimized the IP address of Snom phones: Whatever the Web Server Type you set for the phone, you can click the IP address that is displayed on the Device List page to access the IP phone.
Optimized the issue of Snom phones: Even through you didn’t upload the phone firmware to the PBX, an error of firmware upgrade failed would be displayed on the IP phone.
Fixed the auto provision template issue of Fanvil phones: The value of <language> parameter in the template was incorrect.
Fixed the issue of Custom Template: Custom template did not take effect if you added devices in bulk or imported an auto provisioning file.
Fixed the issue on Firmware Upgrade page: The uploaded firmware wasn’t be displayed on Firmware Upgrade page after upgrading the phone version.

Linkus Server

The new version of Linkus Server (2.3.15) is pre-installed after upgrading the PBX. Check the updates below:

Improved Linkus performance.

Hotel

The updates of Hotel new version (1.1.26):

Fixed the extension issue of room: the extension was wrong after adding a room.

LDAP Server

The updates of LDAP Server new version (1.4.12):

Optimized LDAP authentication: Anonymous access to the LDAP server is not allowed.

Char utile h+ Integration

The updates of Char utile h+ Integration new version (1.0.21):

Changed the alarm codes of Char App.The alarm codes on newly installed Char App are as follows:
- The default code of Set Alarm is: *95.
- The default code of Delete Alarm is: *96.
- The default code of Delete All Alarm is: *97.
- The default code of Check Alarm is: *98.